Are you having trouble with your Jeep Grand Cherokee’s 4WD system?
If so you’re not alone.
Many Jeep Grand Cherokee owners have reported issues with their 4WD system especially after resetting it.
If you’re having trouble resetting your Jeep Grand Cherokee’s 4WD system don’t worry. We’re here to help. In this article we’ll show you how to reset your Jeep Grand Cherokee’s 4WD system.
First let’s take a look at what the 4WD system is and how it works.
The 4WD system is a four-wheel drive system that’s designed to help your Jeep Grand Cherokee traction in all kinds of conditions.
When you engage the 4WD system the front and rear wheels start to spin at different speeds. This helps your Jeep Grand Cherokee traction in slippery conditions.
However the 4WD system can sometimes get out of sync.
When this happens your Jeep Grand Cherokee’s 4WD system may not work properly. If your Jeep Grand Cherokee’s 4WD system is not working properly you may need to reset it.
To reset your Jeep Grand Cherokee’s 4WD system follow these steps:
- Step 1: Turn off your Jeep Grand Cherokee’s engine.
- Step 2: Disengage the 4WD system.
- Step 3: Locate the 4WD system’s fuse box.
- Step 4: Remove the fuse for the 4WD system.
- Step 5: Wait for 10 seconds.
- Step 6: Replace the fuse for the 4WD system.
- Step 7: Start your Jeep Grand Cherokee’s engine.
- Step 8: Engage the 4WD system.
- Step 9: Test the 4WD system to make sure it’s working properly.
If you followed these steps and your Jeep Grand Cherokee’s 4WD system still isn’t working properly you may need to take it to a mechanic.
We hope this article helped you learn how to reset your Jeep Grand Cherokee’s 4WD system.
Most Commons Symptoms for 4WD Problems in Jeep Grand Cherokee
There are a number of common problems that can occur with the 4WD system in a Jeep Grand Cherokee. Here are some of the most common symptoms and problems that you may encounter.
4WD Warning Light
One of the most common symptoms of a problem with the 4WD system is the 4WD warning light.
This light will come on if there is a problem with the 4WD system. If the light is on it is important to have the system checked out by a qualified mechanic.
4WD Lockup
Another common symptom of a problem with the 4WD system is a 4WD lockup. This can happen when the 4WD system is not working properly.
If you are driving and the 4WD system locks up it is important to pull over and turn the engine off. Once the engine is off you will need to call a qualified mechanic to have the system checked out.
4WD Noise
Another symptom of a problem with the 4WD system is the 4WD noise. This noise can be a clicking noise or a grinding noise.
If you hear this noise it is important to have the system checked out by a qualified mechanic.
4WD Vibration
Another symptom of a problem with the 4WD system is a 4WD vibration. This vibration can be felt in the steering wheel the seat or in the floorboard. If you feel this vibration it is important to have the system checked out by a qualified mechanic.
4WD Slipping
Another symptom of a problem with the 4WD system is the 4WD slipping.
This can happen when the 4WD system is not working properly. If you are driving and the 4WD system slips it is important to pull over and turn the engine off. Once the engine is off you will need to call a qualified mechanic to have the system checked out.
If you are experiencing any of these symptoms it is important to have the 4WD system checked out by a qualified mechanic.
How To Reset Jeep Grand Cherokee Service 4WD System
When your Jeep Grand Cherokee is equipped with the Service 4WD System you can expect nothing but the best in terms of off-road performance.
However like any other system it will eventually need to be reset. Here’s a step-by-step guide on how to do just that:
First you’ll need to find the fuse box. It’s usually located under the hood but if you can’t find it there consult your owner’s manual.
Once you’ve found the fuse box locate the fuse for the Service 4WD System. It should be labeled accordingly.
Next you’ll need to disconnect the battery. This will ensure that there is no power going to the system while you’re working on it.
Once the battery is disconnected you can proceed to the next step.
Now you’ll need to locate the reset button for the system. It’s usually located on the dash but again consult your owner’s manual if you can’t find it. Once you’ve found the reset button press and hold it for approximately five seconds.
After you’ve held the reset button for five seconds you can release it and the system should be reset.
If it doesn’t reset you may need to repeat the process.
Now that you know how to reset the Jeep Grand Cherokee Service 4WD System you can rest assured that your off-road vehicle will be able to perform at its best.